Inlander on the Skeena River |
|
| Career (Canada) | |
|---|---|
| Name: | Inlander |
| Builder: | Spratt shipyards at Victoria, British Columbia |
| Laid down: | 1909 in Victoria |
| Launched: | spring of 1910 for the Skeena River |
| In service: | 1910-1912 |
| Fate: | abandoned at Port Essington, British Columbia |
| Notes: |
Captain Joseph Bucey 1910-11 Captain John Bonser 1911-12 |
| General characteristics | |
| Length: | 135 ft (41.1 m) |
| Beam: | 28 ft (8.5 m) |
| Draft: | 17 inches empty 30 inches loaded |
| Speed: | 12 knots |
The Inlander was a sternwheeler that worked on the Skeena River in British Columbia, Canada from 1910 until 1912. She was owned by the Prince Rupert and Skeena River Navigation Company which was a syndicate of Skeena River businessmen who planned to use the Inlander as a passenger and freight steamer during the busy years of Grand Trunk Pacific Railway construction.[1]
Her route took her from Port Essington to Hazelton, over 180 miles of one of the most treacherous rivers that was ever used for steam navigation.[2]:61
Contents |
The Inlander's first captain was Joseph Bucey, who had been the pilot of the Hazelton. Some of the other officers were Robert Ryder, who was the chief engineer and Jerry Cunningham, the ship's mate. Wiggs O'Neill was the purser. O'Neill would become the foremost historian on the Skeena River sternwheelers and in his later years would write Steamboat Days on the Skeena River and Whitewater Men of the Skeena. Wiggs Creek near Smithers is named in his honour.[3]
Captain Bucey left the Inlander in 1911 and appeared the following year as the captain of the BC Express on the Fraser River.
For the rest of the 1911 season and through to her final voyage in the fall of 1912, the Inlander was piloted by Captain John Bonser. It was fitting that Bonser would pilot the last sternwheeler on the Skeena River, as he had pioneered it twenty years earlier in 1892 for the Hudson's Bay Company in the Caledonia, naming many of the rapids and canyons along the route. The Inlander would be the last of many notable riverboats under Bonser's command, among them, the Nechacco and the Northwest.[4]
By 1912, the Grand Trunk Pacific Railway had reached Hazelton from Prince Rupert and sternwheelers were no longer required on the Skeena River. One by one they departed until the Inlander was the last one left. Some like the Operator, Conveyor and Skeena would go on to work on the Fraser River, while others like the Hazelton would be dismantled. The Inlander left Hazelton for the final time at noon on September 10, 1912.[1] Captain Bonser blew the Inlander's whistle as a final farewell to the crowd that had gathered on the shore. When she reached Port Essington, the Inlander was pulled up onto her ways and simply left to rot.[2]:72[4]
|
||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||